N-Power Batch C applicants should note that the next stage after N-Power Biometric fingerprint enrollment verification is the deployment of the N-Power Batch C applicants who will now be N-Power Batch C volunteers after deployment into their various Places of Primary Assignments (PPA).
All N-Power Batch C applicants have been advised to always check their N-Power/NASIMS dashboard for informations.
If you are an N-Power Batch C applicant encountering any delay or challenges on the N-Power/NASIMS portal due to blank verification, transaction failed, etc, on the N-Power/NASIMS portal, kindly note the following:
1) Such challenges on the N-Power portal is due to large number of N-Power Batch C applicants trying to gain access to the N-Power portal at the same time, N-Power Batch C applicants have been implored repeatedly to login at off-peak hours like during late nights or very early in the morning.
2) Poor network from an N-Power Batch C applicants' area could also make an N-Power Batch C applicant to experience this technical challenge, an N-Power Batch C applicant should try ensuring that his or her signal strength is strong you can switch on your VPN if you have that feature on your computer system or mobile device or try using other Internet Service Providers (ISP) like Swift network broadband.
3) N-Power Batch C applicants can go through their browser app settings and click on "clear cache" or "clear data" from the app installation settings, because the temporary cache might be filled up and this might cause delays in gaining access to the N-Power portal.
Most N-Power Batch C applicants might be worried that after login into the N-Power/NASIMS Portal, they noticed that their score is not showing, documents in the wrong places, even their profile picture either replaced with a document or not displaying at all.
The affected N-Power Batch C applicant should not attempt to alter the N-Power/NASIMS page, all the N-Power Batch C applicant should do is to exercise patience, and not to worry as all documents are still intact in the N-Power portal.
The N-Power management technical team just altered some settings to create space for the N-Power verification updates.
As soon as the N-Power management technical support team is done with the verification upload process everything will be normalised.
Are you an N-Power Batch C applicant trying to login to the N-Power/NASIMS portal and constantly faced with the "invalid password" prompt highlighted in red?
Probably where you wrote down the password cannot be located.
Do not worry, an N-Power Batch C applicant can always create a new password and still login into his or her N-Power/NASIMS dashboard.
The following steps below can be used to recover your N-Power lost password successfully
Step 1: An affected N-Power Batch C applicant should "Click" on login on the NASIMS/N-Power website.
Step2: An N-Power Batch C applicant should click on the “Forgot Password” option to recover his or her password.
Step3: An affected N-Power Batch C applicant should chose the N-POWER application email or preferably the N-Power Batch C applicant can go for the N-POWER application ID.
Step4: The affected N-Power Batch C applicant should enter the information required as selected.
Step5: The N-Power Batch C applicant should Click on “Reset Password”
Step6: The N-Power Batch C applicant should enter his or her new password and click "proceed".
The N-Power Batch C applicant can now login with his or her password created few minutes ago or with your N-POWER application ID.
All N-Power Batch C applicant should please avoid installing this Biometric application on Windows 7 operating system as it will not work on Windows 7 operating system, as this will give you lots of errors.
N-Power Batch C applicants should install the application on Windows 10 operating system, the N-Power Biometric application works perfectly on Windows 10 OS, 64 Bit Laptop or Computer.
Note: N-Power Batch C applicants should install this biometric application on their laptop or desktop computer as this application is not supported on mobile phones.
Below are 6 steps to install the N-Power biometric fingerprint capture application successfully
Step 1 : N-Power Batch C applicants should Visit https://nasimsbiometric.blob.core.windows.net/enrollment/Publish.htm
Step 2 : N-Power Batch C applicants should download and install Biometrics Prerequisite for either 64bit or 32bit A uandU digital persona Finger Print Scanner software.
This depends on the N-Power Batch C applicant's operating system, N-Power Batch C applicants should check their computer system properties to know if their Operating System OS is 64bit or 32bit.
Step 3: N-Power Batch C applicant should download and install .NET Desktop Runtimes (please note that we have .NET ASP runtime which is meant for web hosting server and we also have .NET Desktop Runtime).
If an N-Power Batch C applicant mistakenly installs .NET ASP runtime it will not work, N-Power Batch C applicants have to read the instructions carefully and download .NET Desktop Runtime 64bit or 32bit version.
It is recommend that N-Power Batch C applicant downloads the Installer instead of the Binary files. as the Installer would be easy for the N-Power Batch C applicant to install. The links below can be used to download the installer
https://dotnet.microsoft.com/download/dotnet/thank-you/runtime-desktop-5.0.6-windows-x64-installer
https://dotnet.microsoft.com/download/dotnet/thank-you/runtime-desktop-5.0.6-windows-x86-installer
Step 4: N-Power Batch C applicant should click on the "Install" button that displays after clicking the link below
https://nasimsbiometric.blob.core.windows.net/enrollment/Publish.htm
This should download a setup.exe (executable file). of 8kb size
Step 5: The N-Power Batch C applicant should "double click" on the setup.exe file and install it.
N-Power Batch C applicants should please note that he or she must have an active internet connection before clicking on the setup.exe file. this will then connect to NASIMS (N-POWER) server, and prompt the N-Power Batch C applicant to download the offline software, when successfully downloaded, the icon will appear on your desktop/laptop interface.
Step 6: The N-Power Batch C applicant should "double click" on the NASIMS icon on his or her desktop and login with his or her APPLICATION ID NUMBER and PASSWORD for verification.
All N-Power Batch C applicants should please ensure they have A uandU digital persona Finger Print Scanner.
The following are 8 easy steps an N-Power Batch C applicant must follow to complete the N-Power biometric enrollment process:
1) An N-Power Batch C applicant should login to the N-Power/NASIMS Portal.
2) After login, the N-Power Batch C applicant should "click" on the "verification" tab.
3) The N-Power Batch C applicant should click on "capture your finger" after clicking on the "Verification" tab.
4) The N-Power Batch C applicant should install the N-Power enrollment app, this should be done with a computer or a laptop.
5) After installation of the enrollment app, the N-Power Batch C applicant should, re-enter credentials and "click proceed".
6) The N-Power Batch C applicant should click on "Begin Enrollment".
7) The N-Power Batch C applicant should click on Submit and save enrollment
8) The N-Power Batch C applicant should click on End and exit app.
Shortlisted N-Power Batch C applicants are required to follow the instructions on the N-Power/NASIMS portal to enroll their N-Power biometric information.
The N-Power portal is now active and working properly, all N-Power Batch C applicants can now login and check their Verification status on their N-Power dashboard.
Good luck!!
NASIMS/N-Power has cleared the air on the N-Power portal login issues experienced by several N-Power Batch C applicants attempting to gain access into the N-Power portal, but are having difficulties accessing the N-Power portal.
In a response to a complain by an N-Power Batch C applicant, NASIMS has replied, saying the inability to login into the N-Power portal is due to traffic congestion and also as a result of several login attempts from N-Power batch c applicant.
The N-Power/NASIMS Management has pleaded with the N-Power Batch C applicants to keep on trying as it is a general issue.
If you are an N-Power Batch C applicant, who previously logged into the N-Power/NASIMS website, and got the congratulatory message, but cannot access the N-Power/NASIMS website anymore due to network issues on the N-Power website or traffic congestion on the N-Power portal, and this has hampered the inability of N-Power Batch C applicants to complete the N-Power biometric finger print capture enrollment/verification.
This is what to do, an N-Power Batch C applicant can bypass the NASIMS/N-Power portal by going directly to the NASIMS/N-Power biometric page, by visiting this link https://nasimsbiometric.blob.core.windows.net/enrollment/Publish.htm
The N-Power Batch C applicant should install the software, using a laptop or computer at any cybercafe, (please note Windows 10 Operating System is highly recommended to execute this task, as software might not install on lower versions) and complete the N-Power biometric fingerprint capture enrollment.
Please the N-Power Batch C applicant, should ensure that the cybercafe has the fingerprint sensor in place, before installation.
Note: If an N-Power Batch C applicant, have all the facilities; laptop and the fingerprint scanner at home, the N-Power Batch C applicant can complete the N-Power biometric process at the comfort of his or her doorstep.
With the above process a successful N-Power Batch C applicant can access the NASIMS biometric website without going through his or her N-Power portal.
Most N-Power Batch C applicants have been worried and confused over missing scores and missing documents on the N-Power portal.
To all N-Power Batch C applicants who’s scores and documents are missing? Do not panic as the N-Power/NASIMS management and technical team just removed it to create space for the N-Power Verification and to ease congestion on the N-Power portal, all N-Power Batch C applicants' documents and scores are still there in the N-Power portal database.
The following are four (4) ways an N-Power Batch C applicant can gain access to the N-Power/NASIMS Verification/enrollment Portal:
1) An N-Power Batch C applicant might not be able to gain access to the N-Power Verification portal due to the heavy traffic congestion to the N-Power verification portal coupled with a bad network which will get an N-Power batch C applicant's login attempt bounced.
If this occurs to an N-Power Batch C applicant, the N-Power Batch C applicant should ensure that his or her network is very strong, having a high signal strength and bandwidth, Swift broadband connection could help ease the network signal.
2) An N-Power Batch C applicant should ensure that his or her browser is strong enough to handle the rigid traffic load of the N-Power/NASIMS website.
An N-Power Batch C applicant should try all available browsers to see which one works for him or her.
3) An N-Power batch C applicant's phone storage might be full that will require an N-Power Batch C applicant to clean it up to free up space thereby aiding the N-Power Batch C applicant to surf the internet faster.
4) When an N-Power Batch C applicant recieves an "error" message or "transaction failed" message while trying to login to check his or her N-Power verification status, the N-Power Batch C applicant should try again later, the N-Power Batch C applicant will gain access to the N-Power portal when his or her login details are unlocked again.
An N-Power batch C applicant should understand that the management of the N-Power Programme are conducting the verification/enrollment exercise in batches to avoid congesting the website.
That is why when an N-Power Batch C applicant checks the verification page, the N-Power Batch C applicant will be asked to check back later.
The N-Power screening exercise is ongoing concurrently with the N-Power verification/enrollment biometrics fingerprint capturing.
An N-Power Batch C applicant should have it at the back of his or her mind that the N-Power programme is in categories, the N-Power non-graduate component and the N-Power graduate component these categories may take off on different date as well as the fingerprint capture verification.
About Greenpeg Nigeria Limited Greenpeg Nigeria Limited offers engineering, procurement, construction, installation, operations and mainten...
