N-Power Batch C Shortlist: 8 Steps To Successfully Complete The N-Power (NASIMS) Biometric Enrollment

The following are 8 Steps an N-Power Batch C applicant must follow to successfully complete the N-Power (NASIMS) Biometric Enrollment Process:

STEP 1: An N-Power Batch C applicant should login into his or her dashboard and Click the "Verification" tab.

STEP 2: An N-Power Batch C applicant should click on the "capture your fingerprint" button to download and install the enrollment application, please note, this should be done with a laptop/computer system preferably a 64 bit configuration and windows 10 Operating System.

STEP 3: After the installation of the N-Power (NASIMS) biometric client, the N-Power Batch C applicant should provide the required credentials, at this point the N-Power Batch C applicant should note that the credentials spoken of are not your documents, but your N-Power Application ID 

STEP 4: An N-Power Batch C applicant must ensure the fingerprint biometric device is well connected, then the N-Power Batch C applicant should click on "Begin Enrollment" to launch the enrolment process.

STEP 5: The N-Power Batch C applicant should click on the finger to start the enrolment process.

STEP 6: N-Power Batch C applicants are to enrol their Right thumb, Right index, left thumb and left index finger (a total of 4 Fingers) for a successful enrollment.

STEP 7: After successful enrollment, the N-Power Batch C applicant should click on "submit" to save the biometric enrollment.

STEP 8: This is very important, after successful enrollment, the N-Power Batch C applicant should please check the "Verification" tab of the N-Power (NASIMS) portal to confirm if the fingerprint capture was completed successfully. 

An N-Power Batch C applicant is expected to see the image below, once Successful the image will have the ✓ icon.

If an N-Power Batch C applicant have successfully completed the N-Power Biometric fingerprint enrollment and yet to see the ✓ beside the fingerprint icon, the N-Power Batch C applicant should simply log out and login again and the ✓ will appear 

N-Power Batch C: How To Fix "Take Test " Issue Displayed On Your N-Power Portal

NASIMS/N-Power has advised all N-Power Batch C applicants faced with the "take test" issue displayed on their N-Power portal not to retake test.

All N-Power Batch C applicants are to ignore "the take test " message, as the N-Power Batch C applicants' previous score whether visible or not, is still intact in the NASIMS N-Power test database.

According to NASIMS/N-Power all successful N-Power Batch C applicants will be contacted via email.

N-Power Batch C: Please Ignore SMS From bit.ly/nasims-gov-ng Not From NASIMS

N-Power Batch C applicants have been advised to ignore the congratulatory text  message coming from the malicious website bit.ly/nasims-gov-ng.

This text message is not from N-Power/NASIMS, all N-Power Batch C applicants have been advised to be extremely cautious especially during this period of shortlising in order not to fall victim of circumstance.

N-Power Batch C applicants have been informed to always check their N-Power portal dashboard from time to time for updates.

N-Power Batch C: Reason Why Some N-Power Batch C Applicants Were Told To "Check Back Later"

Most N-Power Batch C applicants, that were not shortlisted have always been asking the question why they were told to "check back later", even after passing the N-Power NASIMS online test.

NASIMS (N-Power) have clearly stated the reason behind the "check back later" message by informing the affected N-Power Batch C applicants, that the reason why the N-Power Batch C applicants keep receiving the check back later message is because the shortlising process is still ongoing and more successful N-Power Batch C candidates will be contacted for the next batch as at when due.

According to this statement by NASIMS/N-Power, more N-Power Batch C applicants are still being shortlisted and selected periodically, all an N-Power Batch C applicant needs to do is to constantly check his or her email.

N-Power Batch C Shortlist: 2 Reasons Why An N-Power Batch C Applicant Have Not Been Shortlisted

The following are two reasons why N-Power Batch C applicants have not been shortlisted:

1) According to Sadiya Umar Farouk, the minister in charge of the N-Power Program, shortlisting of N-Power Batch C applicants is still ongoing all N-Power Batch C applicants are to keep checking  their NASIMS dashboard and individual email till the N-Power Batch C shortlising process is over.

2) Over five million persons applied for the N-Power Program, but just one million is needed, 500,000 N-Power Batch C volunteers will be in the first stream and the second stream will have the next 500,000 N-Power Batch C Volunteers.

N-Power N-EXIT: 2 Reasons Why N-Power Batch A & B Volunteers Are Yet To Recieve Exit Package

The following are 2 Reasons Why N-Power Batch A and N-Power Batch B volunteers are yet to receive their exit package

1) More time is needed to process over 400,000 N-Power Batch A and B applications, the process is cumbersome and requires carefulness according to the minister.

2) The Government is seeking all means to fund the CBN loan affiliate programme. A supplementary budget will be passed this month, N-Power Batch A and B waiting for the loan needs to exercise some patience.

N-Power Batch C: How To Fix "Cannot Start Application" Error During N-Power Biometric Installation

Most N-Power Batch C applicants keeps getting this download error message when attempting to install the N-Power Biometric Enrollment Verification Client Application.

" Application download did not succeed. Check your network connection, or contact your system administrator or network Service provider"

Firstly an N-Power Batch C applicant should ensure he or she is using a very strong internet network broadband.

Secondly ensure your Operating System is windows 10 OS to be on a safe side.

Thirdly, please N-Power Batch C applicants are being advised to follow strictly the installation guide on how to install the N-Power NASIMS Biometric Client.

An N-Power Batch C applicant will experience the "download" error if the N-Power Batch C applicant did not install the Fingerprint reader Prerequisite for either 32 (x32) bit Installation or 64 bit Installation (x64) or the General Installer.

The following prerequisite is required for Biometric Client:

.NET Desktop Runtimes .NET Core Runtime 3.1 and, For some systems, an N-Power Batch C applicants needs both the .NET Core SDK and .NET Core Runtime, please download for .NET Core 3.1 

The .NET Runtimes are required in order to eliminate the "unhandled exception" error being experienced by some N-Power Batch C applicants when installing the N-Power NASIMS Biometric Client.

An N-Power Batch C applicant can visit https://nasimsbiometric.blob.core.windows.net/enrollment/Publish.htm to install the required .Net Runtimes

If the issues continues or persist, N-Power Batch C applicants are advised to visit the nearest cafe, especially the cybercafe that handles JAMB registration and enrollment.

N-Power Batch C Shortlist: 4 Fingers And Not 10 Fingers Required For Biometrics

Most N-Power Batch C applicants have been in a state of confusion and argument over the amount of finger an N-Power Batch C requires to capture during the N-Power NASIMS Biometric Enrollment Verification process.

N-Power/NASIMS has clarified this issue, please all N-Power Batch C applicants are to use a thumb and an index finger on both hands making a total of four fingers, and not all ten fingers as some N-Power Batch C applicants claim.

N-Power Batch C: How To Fix " Unhandled Exception" Error During N-Power Biometric Installation

Most N-Power Batch C applicants keeps getting this error message when attempting to install the N-Power Biometric Enrollment Client App.

" Unhandled exception has occurred in your application. If you click continue, the application will ignore this error and attempt to continue"

Please N-Power Batch C applicants are being advised to follow strictly the installation guide on how to install the N-Power NASIMS Biometric Client.

An N-Power Batch C applicant will experience the "unhandled exception" error if the N-Power Batch C applicant did not install the Fingerprint reader Prerequisite for either 32 (x32) bit Installation or 64 bit Installation (x64) or the General Installer.

The following prerequisite is required for Biometric Client:

.NET Desktop Runtimes .NET Core Runtime 3.1 and, For some systems, an N-Power Batch C applicants needs both the .NET Core SDK and .NET Core Runtime, please download for .NET Core 3.1 

The .NET Runtimes are required in order to eliminate the "unhandled exception" error being experienced by some N-Power Batch C applicants when installing the N-Power NASIMS Biometric Client.

An N-Power Batch C applicant can visit https://nasimsbiometric.blob.core.windows.net/enrollment/Publish.htm to install the required .Net Runtimes